The most misunderstood part of your vehicle

Picture in your mind an automobile.

Now, what pops into your mind right away? Isn’t it the body? Or maybe the colour, or the chrome. What about the length… Yes?

After that, we think about the interior, the upholstery and maybe even the all-important engine compartment.

Hardly anyone would visualize a differential or a leaf spring. In fact, most people don’t know the difference between a brake pad and a brake drum.

How come?

Ever heard of “out of sight, out of mind?”

A section of your vehicle goes unnoticed, hidden away under a glitzy exterior.

And the name of this hidden realm?

We’re talking about the chassis… a French word which literally means “frame.” Basically,  everything on your automobile from the ground up to where it meets the body.

4 components make up the chassis:

  1. Vehicle Frame

The frame of any vehicle is the base upon which every critical part of the vehicle – the engine, the transmission and, of course, the body rests upon the frame.

  1. Wheels and Tires

After energy and torque are created, it’s up to the wheels and tires to create the traction necessary for forward motion.

  1. Steering Works

We can easily recognize the steering wheel. However, down in the bowels of your chassis exists an intricate weave of connecting arms and linkage that guides your wheels and helps maintain control.

  1. Suspension Systems

Your suspension acts as the ‘middleman’ between you and the road. It controls how your vehicle responds to road conditions.

If the road dishes up rugged conditions, your suspension transforms the bumps and dips into cloudlike smoothness.

Here’s a brief overview of the primary function of your suspension system

Your suspension system basically has one very important job: Controlling the ride quality of your vehicle.

There are tools that your suspension uses to smooth out your ride: springs and dampers. Let’s take a look at how they work.

  1. Springs

There are 3 basic types of springs used on modern automobiles: coil springs, leaf springs and torsion bars.

Coil Springs:  Basically, a heavy-duty strip of metal that has been wound around to form a spiral or helix.

Leaf Springs:  A stack of steel strips, called leaves.

Torsion Bars:  Instead of flexing or compressing, a torsion bar absorbs energy by twisting. They are primarily used for front-end suspensions of all types of vehicles.

  1. Dampers (Shock absorbers)

Without a shock absorber, your vehicle would never stop bouncing. It keeps the ride of your vehicle bounce-free as possible.

The different types of suspensions

There are 2 basic types of suspension systems: Dependent and Independent. Let’s take a closer look at the unique characteristics of each system.

  1. Dependent suspension systems

On a dependent suspension system, the wheels on the left and right side of the vehicle are connected by a solid axle that spans the entire width of the frame.

Both wheels are linked to this single beam, and respond to road conditions by working together as a pair. Because of their ruggedness, dependent suspensions are often used on heavy-duty trucks, SUVs and rear-wheel drive cars.

  1. Independent Suspension System

An independent suspension system does not use an axle to connect both wheels. Consequently, the wheels react separately to road conditions.

Compared to a dependent system, an independent suspension provides better ride quality.

But here’s the thing…

If you gain better ride quality, you sacrifice the spring rate. And the reverse is true… increase the spring rate,* and you sacrifice ride quality.

There is a solution to this problem – something that will increase spring rate* and improve ride quality all at the same time…

*Increasing the spring rate does not increase the GVW