A Sprinter van is one of the most versatile vehicle options in today’s world. The van can be outfitted as a passenger van, work van, limousine, mobile office, RV, or you name it. Because of its versatility, most people are concerned about the suspension, continually looking for ways to reduce sway, side to side wobbling, sagging and bounce. The following are the four key suspension system components that influence your choice of a Sprinter van.
- Springs – soften the ride by allowing the chassis to float up and down
- Shocks and Struts – dampen & control the amount of spring rebound
- Sway Bar – adds stability by reducing body roll on corners and irregular roads
- Bump Stops – prevent metal-hitting-metal when the suspension bottoms out
Is your Sprinter van hard to control at high speeds?
Mercedes-Benz is well known for making high-quality vehicles. That being said, the German automaker is not immune to issuing recalls, and the Mercedes Sprinter 3500 is no exception to the rule.
If you own a 2012-2018 Mercedes-Benz Sprinter, you may need to get it into your local dealership due to a new recall. The electronic stability control unit can become deactivated without warning. This may not seem like a big deal, but it can be dangerous. According to CarComplaints.com, “If a driver loses stability control, warning lights and messages will activate in the instrument panels and the driver may have trouble controlling the van in certain driving situations.”
The high roof versions of the Sprinter van are super-tall and can become top-heavy. When fully loaded, the possibility of a rollover is increased. When the vehicle begins to lean too far on high-speed cornering and high-wind conditions, the ‘electronic stability control unit’ is supposed to help prevent an accidental roll-over by slowing the vehicle down to a crawl.
What can you do to make driving your Sprinter van safer?
- Be aware of your overall height. Sprinter vans are much taller than an ordinary family van. Always know how tall your van is before entering underground parking, a hotel entrance, or a drive-through.
- Make turns slowly, accounting for the extra weight and length of the vehicle.
- Avoid heavy winds. Winds can flip you and your van in no time, especially if you’re going too fast. If you must drive through powerful winds, slow down.
- Safety first. When traveling long distances, make sure the driver is well-rested. Practice safety over speed. And never text when driving. Completely avoid all forms of distracted driving.
Help stabilize your suspension with a Timbren SES suspension upgrade.
Out of the 400 plus kits designed by Timbren, there are only two SES upgrades that work perfectly with the Mercedes Sprinter 3500 van: Part # MBRSP35A and # MBRSP35B.
If you own a camper van, the right choice is part # MBRSP35A. This kit replaces the bump stops on the rear suspension to give it just the right amount of added capacity for a perfect blend of stability and comfort.
If you own a cube van used for commercial work, the right choice is part # MBRSP35B. This kit also replaces the bump stops on the rear suspension to deliver maximum stability for top-heavy loads.
Both kits install the same way. Below are 4 simple and easy steps to follow:
- Raise vehicle allowing the axle to hang freely.
- Remove existing bump stops.
- Mount preassembled Aeon® rubber spring to existing brackets.
- Lower vehicle.
Be careful to choose the correct part # to ensure you get the best combination of added stability and comfort.
Note: Even though Timbren SES kits increase the spring capacity on your vehicle, they do not increase the GVWR set by the manufacturer.
Why is Timbren SES the best Sprinter van suspension upgrade?
In addition to ‘quick and easy’ installation, Timbren part # MBRSP35A and part # MBRSP35B are the best helper springs for your Sprinter van because they are the most reliable. Timbren SES upgrades offer a progressive spring rate and require zero maintenance. These 2 advantages alone guarantee for you the most reliable helper spring in the industry.
There are over 400 Timbren SES kits that fit virtually every truck and SUV that rolls off the assembly line. Every component is carefully selected to provide the best combination for your vehicle. Part # MBRSP35A and MBRSP35B are tailored to meet the specific needs of the Sprinter van by maximizing its stability.
Timbren SES suspension upgrades are “stronger than steel” & more reliable than air.” That’s why every Timbren SES product comes with a No B.S. Lifetime Warranty and 100-Day Satisfaction Guarantee.
For more information on Timbren SES, visit Timbren.com