5200 lb Axle-Less Trailer Suspension w/ 4” Drop
5200 lb Axle-Less Trailer Suspension w/ 4” Drop
5200 lb Axle-Less Trailer Suspension w/ 4” Drop
5200 lb Axle-Less Trailer Suspension w/ 4” Drop
5200 lb Axle-Less Trailer Suspension w/ 4” Drop
5200 lb Axle-Less Trailer Suspension w/ 4” Drop
5200 lb Axle-Less Trailer Suspension w/ 4” Drop
5200 lb Axle-Less Trailer Suspension w/ 4” Drop

5200 lb Axle-Less Trailer Suspension w/ 4” Drop

SKU# ASR5200S04
USD $1,634.24

FREE Ground Shipping on All Orders

3-Year Warranty

Available to ship within 2 weeks.

Looking for increased versatility for your utility, landscape, or construction trailer? Designing a trailer to have its deck drop down to the ground? Working on another type of light-fit custom or retrofit rig?

Our Axle-Less trailer suspension kits offer ultimate creative freedom for your custom trailer build.

With no through axle, there’s no need to worry about ordering the correct axle dimensions. Shims are also supplied giving you the flexibility to adjust, if necessary, the suspension alignment and camber specific to your trailer frame. And polyurethane bushings — used at the pivot point on the control arm — hold the pin firmly in place, resulting in better stability and a more controlled alignment with each moving component.

Axle-Less trailer suspension features two Aeon® rubber springs, one for jounce and one for rebound, absorbing road shocks and allowing for a quiet, smooth ride, whether on the highway or down a dirt road.

Durable and weather-resistant, these suspensions are built to last in any environment, from the heat of the Outback to the sub-freezing winters of Canada.

Each Axle-Less trailer suspension kit comes with both driver and passenger side to give you a full suspension.

Need something more suited for off-roading and overlanding? We recommend our HD series of Axle-Less trailer suspensions.

Key Features

  • 4” drop outboard arms to achieve lowest possible deck height
  • Standard spindles for use with standard-width tires up to a maximum size of ST235/85R16 *
  • Brake flange included for optional brakes
  • Smooth quiet ride empty or loaded
  • Durable powder coat finish
  • Easy bolt-on installation
  • No thru axle

Specs

  • 5200 lb trailer suspension capacity
  • Outboard arms with 4” drop and standard spindles for tires up to a maximum size of ST235/85R16 *

Weights and Dimensions

Choosing A Trailer Suspension

The optimal performance of an Axle-less system is achieved when the average load on the suspension falls within the range of 60 to 80 percent of its rated capacity. For example, a standard ASR35HDS Axle-less suspension with a load rating of 3500 lbs would operate most effectively with an average load between 2100 and 2800 lbs (950 to 1270 Kg).

It is important not to overlook scenarios of maximum load: In addition to the regular weight, consider all sources of extra weight: a full water tank, waste water tank, loaded fridge, generator and any other type of equipment, spare tire, one or two 12V batteries, water hose, power cord, and a propane tank, tent, ladder, tools, etc.

Keep in mind that the load distribution also plays a big role. In the case of a tandem trailer, due to a number of factors (including the height of the hitch, or distance between axles, etc) the load on the front axle could happen to be different that the rear axle. The weight on the left side could also be different from the right side. So one axle or even one corner could potentially be overloaded even if the trailer is not overloaded! Always follow safety guidelines and leave plenty of extra room for weight when choosing your suspension. This isn’t just about safety; it’s also about getting the best ride quality and handling for your trailer.

If you need further assistance in selecting a suspension for your trailer. Please reach out to Timbren’s Customer Service Team.

 

*Please note that these are the maximum allowable tire sizes for each suspension, not necessarily the most popular or preferred ones for your trailer application. The assumption is that you are using a standard trailer wheel with zero offset.

Each Axle-Less trailer suspension kit comes with both driver and passenger side to give you a full suspension.

What's Included

  • 2x suspensions
  • 2x outboard arms with 4” drop and spindles with brake flange
  • Grade 8 zinc coated hardware
  • 8x camber shims

How to Install

5200 lb Axle-Less Trailer Suspension w/ 4” Drop SKU#ASR5200S04

Suspension Capacity

  • 5200 lb

Ride Height

  • 4” Drop

Spindle Arm Length

  • Standard Length

Brake Flange

  • Yes

We offer a 3-year warranty on our Axle-Less trailer suspensions.

Covered under this warranty is the replacement of the failed part. This warranty does not include labor, freight, collateral damage, or any ancillary costs which may arise as a result of the failed part. We retain the right to make our own inspection of the failed part to determine the validity of the claim.

Read more about our warranty policy

FREE Ground Shipping on Orders Over $99

Free ground shipping is available in the contiguous United States on all orders over $99. Normal processing time is between 1 – 2 business days from placing the order.

We make every effort to ship the order within this processing time; however, no guarantees are expressed or implied.

100-Day Money Back Guarantee

If you’re not happy with your Timbren product, we want to remedy that. If our customer service team can’t find a solution for you, you can return your Timbren product for a refund, a replacement product, or another product of similar value within 100 days of purchasing the product. We’ll cover return shipping costs, too.

Read more about our 100-Day Money Back Guarantee

Buy this with
Axle-Less Wheel Adapter Kit for Jeep
SKU# P107C

Axle-Less Wheel Adapter Kit for Jeep

$405.45