7000 lb HD Axle-Less Trailer Suspension w/ Long Spindles and Brake Flange
7000 lb HD Axle-Less Trailer Suspension w/ Long Spindles and Brake Flange
7000 lb HD Axle-Less Trailer Suspension w/ Long Spindles and Brake Flange
7000 lb HD Axle-Less Trailer Suspension w/ Long Spindles and Brake Flange
7000 lb HD Axle-Less Trailer Suspension w/ Long Spindles and Brake Flange
7000 lb HD Axle-Less Trailer Suspension w/ Long Spindles and Brake Flange
7000 lb HD Axle-Less Trailer Suspension w/ Long Spindles and Brake Flange
7000 lb HD Axle-Less Trailer Suspension w/ Long Spindles and Brake Flange
7000 lb HD Axle-Less Trailer Suspension w/ Long Spindles and Brake Flange
7000 lb HD Axle-Less Trailer Suspension w/ Long Spindles and Brake Flange

7000 lb HD Axle-Less Trailer Suspension w/ Long Spindles and Brake Flange

SKU# ASR7KHDS05
USD $1,716.74

FREE Ground Shipping on All Orders

3-Year Warranty

Available to ship within 2 weeks.

Go off-the-grid with your camper. Tow your hunting trailer to remote trails. Take your custom rig on that overland trek.

Our HD Axle-Less trailer suspensions are built exclusively for off-roading and overlanding. With no through axle to cause hang-ups, you’ll experience exceptional ground clearance. And as an independent trailer suspension, you’ll maintain maximum control of your rig over rough off-road terrain.

Components made from heavy-gauge steel support the increased demands of off-road use. And our softer Aeon® rubber springs allow for more suspension travel without compromising strength or capacity.

Shims are also supplied giving you the option to adjust, if necessary, the suspension alignment and camber specific to your trailer frame. Polyurethane bushings — used at the pivot point on the control arm — hold the pin firmly in place, resulting in better stability and a more controlled alignment with each moving component.

Durable and weather-resistant, these suspensions are built to last in any environment, from the heat of the Australian Outback to the sub-freezing winters of Canada.

So you can tow anywhere you go — and enjoy a smooth, quiet ride along the way.

Each Axle-Less trailer suspension kit comes with both driver and passenger side to give you a full suspension.

Key Features

  • Smooth quiet ride empty & loaded
  • Durable powder coat finish
  • Easy bolt-on installation
  • No thru axle

Specs

  • Heavy Duty 7000 lb trailer suspension capacity
  • Outboard arms with HD spindles
  • Use with Tires up to a maximum size of 35 x 12.5 x 20 *
  • Maximum ground clearance when compared to suspension with axles

Weight and Dimensions

Choosing A Trailer Suspension

The optimal performance of an Axle-less system is achieved when the average load on the suspension falls within the range of 60 to 80 percent of its rated capacity. For example, a standard ASR35HDS Axle-less suspension with a load rating of 3500 lbs would operate most effectively with an average load between 2100 and 2800 lbs (950 to 1270 Kg).

It is important not to overlook scenarios of maximum load: In addition to the regular weight, consider all sources of extra weight: a full water tank, waste water tank, loaded fridge, generator and any other type of equipment, spare tire, one or two 12V batteries, water hose, power cord, and a propane tank, tent, ladder, tools, etc.

Keep in mind that the load distribution also plays a big role. In the case of a tandem trailer, due to a number of factors (including the height of the hitch, or distance between axles, etc) the load on the front axle could happen to be different that the rear axle. The weight on the left side could also be different from the right side. So one axle or even one corner could potentially be overloaded even if the trailer is not overloaded! Always follow safety guidelines and leave plenty of extra room for weight when choosing your suspension. This isn’t just about safety; it’s also about getting the best ride quality and handling for your trailer.

If you need further assistance in selecting a suspension for your trailer. Please reach out to Timbren’s Customer Service Team.

 

*Please note that these are the maximum allowable tire sizes for each suspension, not necessarily the most popular or preferred ones for your trailer application. The assumption is that you are using a standard trailer wheel with zero offset.

Each Axle-Less trailer suspension kit comes with both driver and passenger side to give you a full suspension.

What's Included

 

  • 2x HD suspensions (1 Left, 1 Right)
  • 2x long outboard arms with straight spindles and brake flange
  • Grade 8 zinc coated hardware
  • 8x camber shims
  • 2x Cotter pin
  • 2x Jam nut
  • 2x Spindle washer

How to Install

7000 lb Heavy-Duty Axle-Less Trailer Suspension SKU #ASR7KHDS05

Suspension Capacity

  • 7000 lb HD

Ride Height

  • Standard Height

Spindle Arm Length

  • Long Arm Length (Wide Tires)

Brake Flange

  • Yes

We offer a 3-year warranty on our Axle-Less trailer suspensions.

Covered under this warranty is the replacement of the failed part. This warranty does not include labor, freight, collateral damage, or any ancillary costs which may arise as a result of the failed part. We retain the right to make our own inspection of the failed part to determine the validity of the claim.

Read more about our warranty policy

FREE Ground Shipping on All Orders

Free ground shipping is available in the contiguous United States on all orders. Normal processing time is between 1 – 2 business days from placing the order.

We make every effort to ship the order within this processing time; however, no guarantees are expressed or implied.

Returns

If you’re not happy with your Timbren product, we want to remedy that. If our customer service team can’t find a solution for you, you can return your Axle-Less trailer suspension for a refund within 100 days of purchase. Product cannot have been mounted to your trailer, and return shipping is not covered by Timbren.

Read more about our returns policy

Buy this with