Rear BES Rotor | Toyota Tacoma/Tundra (2024-Present) | 335mm Rotor
FREE Ground Shipping on All Orders
100-day money-back guarantee and a 42-month / 42,000-mile warranty.
Product ships within 1–3 business days
Built for the Heat of the Haul.
Most rotors feel fine when your truck is empty, but the second you hook up a trailer, the physics change. Heavy loads generate massive amounts of heat that can lead to dangerous brake fade. Precision-engineered specifically as a direct-fit upgrade for the rear axle of your Toyota Tacoma or Tundra (2024-Present) with 335mm Rotor, Timbren BES Rotors are built to master that exact stress.- Advanced Heat Management: Features our proprietary OnyxBond™ matte black coating, which is heat-rated up to 932°F (500°C)—providing a 67% higher heat threshold than standard coatings to prevent premature thermal fade.
- Vibration-Free Stops: Each rotor is meticulously fly-cut balanced to eliminate the high-torque vibrations, shudder, and pedal pulsation common during heavy towing.
- Premium Double-Disc Ground Finish: Precision-machined on both sides simultaneously to guarantee perfectly flat surfaces and uniform thickness. This high-end process eliminates break-in variations and creates the ultimate mating surface designed specifically to pair with Timbren OnyxBite™ Severe-Duty Brake Pads.
- Robust Corrosion Resistance: The protective OnyxBond™ layer acts as a permanent barrier against rust, road salt, and moisture, keeping your cooling vanes clear of debris to ensure maximum longevity.
- Ready for Work: Designed as an exact, direct-fit replacement for your factory equipment, allowing for a straightforward, DIY-friendly installation.
Confidence for 42,000 Miles. Every rotor is backed by our hassle-free 100-day money-back guarantee and a 42-month / 42,000-mile (67,000 km) warranty so you can run your truck hard with complete peace of mind.
Key Features
What's Included
Check whether this product fits your vehicle by using the Verify Fitment tool above, or by using the following table:
Confidence for 42,000 Miles.
Backed by our 100-day money-back guarantee and a 42-month / 42,000-mile warranty.
Read more about our warranty
SEE OUR BREAKS IN ACTION
|
O.E.M. |
|
|---|---|---|
|
PURPOSE |
Towing & Hauling |
Everyday Driving Only |
|
QUALITY |
67% Higher Heat Threshold |
Prone to Brake Fade |
|
WARRANTY |
42-Month, 42,000-Miles |
24-Month, 24,000-Miles |
|
PEACE OF MIND |
100-Day Guarantee |
Factory Coverage Only |
|
NOISE CONTROL |
Quiet, Smooth, No Vibration |
Prone to Squeal & Vibration |
|
LONG-TERM PROTECTION |
Advanced Corrosion Defense |
Standard Corrosion Protection |
Your questions, answered
Everything you need to choose the right towing & hauling solution.
Every set of Timbren BES brakes is covered by a 42 month, 42,000 mile (67,000 km) warranty, so you can run them hard with confidence.
Plus, get a 100-day hassle free, money-back guarantee. If you’re not satisfied, send it back. It’s hassle free for that very reason.
We stand behind our products with coverage for material and workmanship defects, giving you added confidence that your Timbren parts are built to perform the way they should.
If something is not right due to the way it was made, we’ll make it right.
Timbren BES brake pads come with a factory bed-in layer that helps them start engaging with the rotor right away after install.
That means you get more immediate pedal response without needing a long or complicated break-in process.
Instead of waiting for the brakes to fully come around, they feel more dialed-in from the start.
Timbren BES brakes are a severe-duty brake upgrade, not just an OEM stock replacement.
They’re built for trucks that tow and haul, with features designed to handle more heat, more load, and more real-world use than typical OEM-style brakes.
OnyxBond™ is a durable, black protective layer engineered into the rotor. It helps protect against corrosion, stands up to the harshest of elements (salt, sand, debris), and holds up better under heat—so the rotor maintains its performance and appearance over time.
OnyxBite™ is Timbren’s severe-duty low-metallic brake pad compound. It uses a small amount of metal in the pad surface to deliver a stronger initial bite and handle heat better under load. Compared to a more standard pad material, OnyxBite is built to keep stopping power more consistent when the brakes start getting hot.
Yes, that’s exactly what they’re built for.
When you’re towing, your brakes are working harder and generating more heat. Timbren BES is designed to stay more consistent under that load, helping you maintain better control of your rig and whatever you’re towing.
Timbren BES is designed to reduce noise and vibration for smoother, quieter braking.
Like any brake, some dust is normal, but these are built to perform cleanly and consistently without the squeal and harshness you often get from lower-quality OEM setups.