Toyota Tacoma Front & Rear Active Off-Road Bumpstop Package With U-Bolt Flip Kit
Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable and quiet axle engagement and disengagement.
Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
This Active Off-Road Bumpstop package for the Toyota Tacoma includes bump stop upgrades for front and rear suspension. The front suspension kit replaces the OEM bump stops located on the lower control arm. The rear suspension kit replaces the OEM bump stops sitting on the leaf spring pack. Included in this kit is a U-Bolt flip kit to allow for more ground clearance.
Active Off-Road Bumpstops are a bump stop upgrade that will improve your off-road experience in several ways:
Provide Smooth Axle Engagement
Instead of the harsh jounce you get from regular bump stops, enjoy a much softer, smoother stop when your vehicle bottoms out.
Maintain Axle Travel
Active Off-Road Bumpstops will not limit axle travel, but allow full articulation of the suspension system.
Deliver Greater Control Over The Vehicle
Remain in control of your off-road vehicle during hard-to-handle situations on extreme terrain and at high speeds.
Stay On The Trail Longer
Remove the stress to your body and your off-road vehicle. Active Off-road Bumpstops absorb the harsh slams when your vehicle bottoms out, allowing you to stay out on the trail much longer doing what you love to do.
Unlike hydraulic bump stops, Timbren Active Off-Road Bumpstops require zero maintenance. Zip. Zilch. Nada. This is a set-it-and-forget-it upgrade. No tweaks or refills required! Once you install your Timbren bump stop upgrades, they won’t need any supervision whatsoever.
You receive a lifetime warranty with every purchase of Active Off-Road Bumpstops. We have been designing and manufacturing Aeon® rubber springs for over 50 years and confidently stand behind our products.
Timbren vs. Hydraulic Bump Stops
- Headache Free - Hydraulic bump stops make a loud ‘banging’ noise each time it slaps the strike pad. Timbren bump stops quietly engage with the axle.
- Zero Maintenance - Hydraulic bump stops require maintenance to continue working properly. Timbren bump stops are maintenance free.
- Lifetime Warranty - Timbren bump stops come with a Lifetime Warranty. Hydraulic bump stops do not.
- Save Money - Timbren bump stops cost significantly less than hydraulic bump stops.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bump stops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
Specs: Front Bumpstops - ABSTOF
- 1,000 lb capacity
- 1,800 lb bump load capacity
- Overall kit height = 2”
- Total deflected (compressed) height = 1.25”
- Amount of deflection (compression) = 0.75”
Specs: Rear Bumpstops - ABSTRFK
- 2,000 lb capacity
- 4,800 lb bump load capacity
- Overall kit height = 4.75”
- Total deflected (compressed) height = 2.5”
- Amount of deflection (compression) = 2.25”
What’s Included In The Box?
"What was really fun were the whoops. I would swear someone put a pillow on my suspension." Lori Palmer
"I love the additional support the Active Off-Road Bumpstops give my suspension when I'm off-road." Mark Cosio
"Countless miles of off-road trails and over 2 years of abuse, our Timbren Active Off-Road Bumpstops have not only been a huge advantage but also a necessary modification. Keeping our rig from bottoming out 1 trail at a time!" @fargo4x4
Timbren Active Off-Road Bumpstops come with a Lifetime Warranty which includes:
- Defects in material and workmanship.
- Damaged parts under normal use and service.
Warranty limitations include the following:
- Warranty applies to original purchaser.
- Warranty is not transferable to another vehicle.
- Warranty does not include labor, freight or collateral damage.
- Timbren reserves the right to inspect the failed part and ask for proof of purchase.
- Timbren will not warrant the product in the event of alteration, misuse, overload, negligence or damage cause by others.
What’s the difference between Active Off-Road Bumpstops and Timbren SES?
Active Off-road Bumpstops are used to soften the harsh impact when driving off-road. They also help avoid damage to the shock absorber and contact of larger tires with the fender. Timbren SES serve as helper springs to level the load and reduce roll and sway for vehicles carrying heavy loads.
My off-road vehicle has a suspension lift. Will Timbren’s Active Off-Road Bumpstops still work for me?
Absolutely! Timbren’s Active Off-Road Bumpstops are designed to work with your vehicle regardless of the lift kit you have installed. If you want them to engage sooner, simply order a spacer kit.
Should I install Active Off-Road Bumpstops on both the front and rear suspension of my vehicle?
We recommend both front and rear, especially when navigating rough, off-road terrain. Active Off-Road Bumpstops on all 4 corners of your vehicle will work together to give you a smooth, safe ride.
Do Active Off-Road Bumpstops require any maintenance?
No. Just like Timbren SES kits, Active Off-Road Bumpstops are also maintenance free.
What are Active Off-Road Bumpstops made from?
The Active Off-Road Bumpstops are made from natural rubber with all the unique characteristics inherent in rubber springs.
What is the warranty for Active Off-road Bumpstops?
All Active Off-Road Bumpstops come with a Lifetime warranty covering all replacement parts up until the time you sell your vehicle.
- Item Requires Shipping
- 18.0 lbs.
- W10.7500” x H9.5000” x L7.0000”
- Free ground shipping to lower 48 states (some exclusions may apply)
Total Reviews (0)
Write the First Review!
You must login to post a review.