The Towing Upgrade Your Tacoma Needs
The stock suspension on your Tacoma rides like a dream but when it comes time to tow & haul that coil spring isn't your friend. Timbren SES is the sidekick your suspension didn't know it needed:
- Eliminate suspension sag
- Towing & hauling performance
- Zero maintenance (seriously, there's none)
- 30-minute DIY install
- 100-day money back guarantee
- No B.S. Lifetime Warranty
2024-Present Toyota Tacoma, Land Cruiser 250 & 2023-Present Sequoia Suspension Enhancement System - Rear Kit
Unstable loads while towing and hauling don’t just make for an uncomfortable ride. Difficult handling, rear sag, and corner sway create dangerous driving conditions — for you, your passengers, and other vehicles.
Whether you’re towing your RV across the country or hauling hay down the highway, our Timbren SES kits level your load, making for a safe, controlled ride so smooth, you might forget you’re towing altogether.
How? Our Aeon® rubber springs deliver a progressive spring rate. As load increases, our rubber springs push back harder, eliminating squat, sway, and roll. After installation, there should be a ½” to 1 ½” gap between the rubber spring and vehicle’s frame — meaning you’ll enjoy a comfortable unloaded ride, too.
What makes Timbren SES kits different from other suspension enhancement systems? Unlike air bags, our kits require zero post-installation maintenance. And unlike other systems, you can install and haul in under 30 minutes, right from your driveway.
Key Features
- Reduces sag, sway, and roll when towing and hauling
- Comfortable ride, loaded or unloaded
- DIY installation
- Zero post-installation maintenance
Specs
- Rated Capacity: 6,000 lbs
- Overall height: 4.5”
Note: Even though you’re increasing the spring rate by adding this upgrade, this does not increase the GVWR (Gross Vehicle Weight Rating). Please make sure that the load does not exceed the GVWR set by the manufacturer.
DIY LEVEL: EASY
"I literally just took out the factory bumpstops and replaced it with these."